Ceiling supply unit Verso

Verso is a improved version of our well established Optima. It offers electrical and gas outlets not only in the horizontal supply bar but also in vertical slidable and rotatable media columns suspended from the supply bar. The media columns are equipped with ball bearings ensuring a smooth running.

For higher work place flexibility the media columns can optionally be fitted with a cantilever arm of 400 mm.

Structure of Verso

schnitt verso
Cross-section Verso

Like Optima, Verso also consists out of vertical beams which are usually mounted on the raw ceiling via a subconstruction. Here as well, these beams operate as in-feed point for gas and electricity where the lines are installed separately.

The supply bar is formed of a massive, extruded anodized aluminium support frame with a front- and backside housing for the medical outlets. Unlike in the Optima, the guiding rail of Verso for carriages/device carriers is located floor-facing at the bottom side. In-feed of media is realised via the guiding-rail which is covered with a flexible enclosure.

Of course, in this new version lightning elements like direct and indirect lights or a night light can be implemented into the supply bar as per individual requirements.

Depending on given space for a bed, media columns can travel a defined distance at each side and are restricted securely by a body stop. A pneumatic brake with convenient ergonomic single-hand control takes care so the media columns can be secured at any required position. The body-stop is free adjustable, maximum rotation of the columns is approximately 330°.



Configuration and accessories

Media column with cantilever arm

As standard the media columns are rotatable and slidable without a cantilever arm. Optionally a cantilever arm with a length of 400 mm or shorter can be supplied.

All our median columns can be fitted individually with high- and low-voltage electrical outlets as well as gas sockets, air motors and narcotic suction. Device trays with or without drawers of different configurations (see pic. 5) serve as holder for medical devices or as writing or depositing surface.

Alternatively, device carriers without electrical or gas installations can be configurated (see page 3) and implemented into the bottom-side guiding-rail.

Of course, all media columns provide space for various medical devices like IV-poles, catheter baskets and much more. Besides the standard equipment with vertical and horizontal accessory rails  also other arrangements are possible. 


Media supply

Media supply Verso

The number of media outlets and their locations in the supply system is customised. All gas sockets are gas-sealed at the inside of the unit and easy accessible from the outside without any further disassembly efforts.

As per customers request, normal 230V-sockets with frame, flush-mounted sockets or sockets with flap lid in variation with or without power light in different colours are available as well as sockets for foreign standards like UK, France, Switzerland, USA or other countries

According to the latest regulations, sockets are connected in multiple circuits. Also connections for potential equalisation are installed in a sufficient amount in an easy accessible position.

We also install special sockets e.g. for dialysis machines and X-ray equiptment. Further installations are data sockets, telephone sockets, nurse-call-combinations, night- and reading lights, switches, dimmer, relays, speakers and other electrical components.

Alternatively as a customer you have the choice to use our device carrier standard components of our ceiling supply unit Optima instead of media columns.

Device carrier – standard components

Technical Data Sheet supply unit and accessories

[all measures in mm]

[W x H x D]

Media Bridge Verso

Ceiling fixation / beams


Max. gap raw ceiling and filigran slab

until 750 mm, otherwise with additive brace

Pillar length


Max. distance between pillars

3 m

Weight per pillar

approx. 18 kg

Measures Baldachin

380 x 380 mm


RAL 9016 traffic white powder-coated,

other RAL-colours available (surcharge)

Supply bar


Weight per running meter

Approx. 45 kg


Profile alu anodized / sheet metal RAL 9016 traffic white powder-coated, other RAL-colours available (surcharge)

Lightning per bed place


Indirect lighting

2 x 39 watt fluorescent tube T5 or 2 x 54 watt fluorescent tube T5

Reading light

1 x 24 watt fluorescent tube T5

Night light

1 x 7 watt fluorescent tube

LED verfügbar


RGB verfügbar


Device carriers [stainless steel]


Max. payload

160 kg


Manual, mechanic rotate- and pushing-brake

Travel path

along total profile length

Tableau large

520 x 25 x 550 mm

Tableau small

350 x 25 x 550 mm

Media column


Max. payload

With cantilever 40kg / Without cantilever 160 kg



Travel path


Cantilever arm

Optional, max. 400 mm


RAL 9016 traffic white powder-coated, other RAL-colours available (surcharge)


[Farbe: RAL 7035 light grey]



400 x 96 x 360 mm (simple drawer)



Simple drawer block

Height: 96 mm

Double drawer block

Height: 192 mm

Keyboard extension with mouse- pad

450 x 63 x 491 mm